Commercial Property Inspector – Barrie is a Certified Building Code Official. He has attained the required training and education with the Ontario Building Officials Association and is fully qualified on Large Buildings and Part 3 of the Ontario Building Code. An unknowing inspector may lead you to believe your property is code compliant when you could in fact be faced with spending thousands or tens of thousands in required building code upgrades.
Aluminum Wiring: In the late 1960′s and early 1970′s copper prices rose and contractors/electricians switched from copper to lower costing aluminum wiring. Concerns with this type of wiring have arisen, for example, when aluminum wire is connected to devices (eg. receptacles, light fixtures) which were not designed for aluminum, or, when aluminum and copper wires are attached. In these cases a reaction can occur causing the connections to fail, perhaps become disconnected, and/or, potentially overheat, spark and catch fire. Symptoms of this can sometimes be seen in the discolouration of receptacles, flickering lights, or the smell of hot plastic insulation.
Asbestos became increasingly popular among manufacturers and builders in the late 19th century because of its sound absorption, average tensile strength, its resistance to fire, heat, electrical and chemical damage, and affordability. It was used in such applications as electrical insulation for hotplate wiring and in building insulation. When asbestos is used for its resistance to fire or heat, the fibers are often mixed with cement (resulting in fiber cement) or woven into fabric or mats. All types of asbestos fibers are known to cause serious health hazards in humans. Removing asbestos from a property can be expensive and time consuming. Personnel have to be licensed to perform asbestos removal.
Mould: Leaking roofs or basements can lead to an excess of moisture in your crawl space, basement or storage areas of your building or office. The best reason is to avoid the growth of fungus, mold, or mildew that may decay and destroy wood and potentially your indoor air quality. Moisture in any form provides the missing ingredient for spores to thrive and grow in its environment. Having your property or building inspected can prevent expensive clean up costs that might be incurred after you purchase a property.
Thermal imaging (infrared camera) is used on all our commercial property inspections. This amazing technology can aid in the detection of heat loss, moisture, water leaks, over-heating conditions and even mould detection. We also perform moisture checks with our up-graded digital moisture detector which allows us to detect moisture up to an inch behind most building products.
The Commercial Property Inspector has been in business for 7 years and has performed over 4,000 inspections. As a Certified Building Code Official with the Ontario Building Officials Assc he has master the Ontario Building Code by completing all the Part 9 (small buildings) and Part 3 (large buildings over 600 m2) which enables him to use this experience when inspecting your commercial real estate investment. All inspections are performed to ASTM E2018 standard and report is based on PCA format.
Looking to find Toronto Commercial Property Inspections, then visit www.commercialbuildinginspector.ca to find the best advice on GTA Commercial Property Inspections for your next investment.
Recent Comments