Barrie Home Inspector

Home Maintenance and Tips for Home Owners

Tag: Professional Home Inspector

Inspecting Your Homes Attic

Inspecting Your Homes Attic.  There should be an access opening to all attic spaces that exceed 30 square feet and have a vertical height of 30 inches or more. The rough-framed opening should be at least 22 inches by 30 inches. It should be located in a hallway or other readily accessible location. An attic access that is located in a clothes closet is often inaccessible due to permanent shelving installed. There should be headroom that is a minimum of 30 inches above the attic access. In some places “attic” is used more specifically to apply to lofts which have boarded floors and ceilings, and usually windows or skylights, and then “loft” is kept to mean a dark, unboarded roof-space which lacks these features.

Knee walls are vertical walls with an attic space directly behind them. You’ll typically find them in houses with finished attic spaces and dormer windows, as with 1-story houses. There are a couple of ways that you may see a knee wall insulated. The most important areas and most overlooked areas to insulate are the open joist ends below the knee wall. Air sealing reduces heat flow from air movement, or convection. Air sealing prevents water vapor in the air from entering the wall assembly. In a 100-square-foot wall, 1 cup of water can diffuse through drywall without a vapor diffusion retarder in a single year. Fifty cups can enter through a -inch round hole. Air sealing is 10 to 100 times as important as installing a vapor diffusion retarder.

Insulation performance is measured by R-value – its ability to resist heat flow. Higher R-values mean more insulating power. Different R-values are recommended for walls, attics, basements and crawlspaces, depending on your area of the country. Insulation works best when air is not moving through or around it. So it is very important to seal air leaks before installing insulation to ensure that you get the best performance from the insulation.

If you hear noises in your attic and you are unsure as to the source, it’s relatively easy to determine if it’s squirrels – squirrels are active during the daytime. Thus, if you hear scampering and scurrying noises during the day, it’s likely squirrels. Other attic-dwelling critters, such as rats and mice, bats, flying squirrels, opossums, and raccoons, are nocturnal, so they mostly only make noise at night. Flying squirrels are also nocturnal. If the noises happen at night, there’s a strong chance of mice or rats.

The squirrel often finds bedding material by shredding roof or wall paper, and shredding vent ducts and insulation around pipes. The biggest problem is that they chew, and I’ve seen dozens of cases in which they’ve chewed electrical wires. It’s estimated that half of house fires of unknown origin are due to rodent chewing on electrical wires.

Most people will have no reaction at all when exposed to molds. Allergic reactions, similar to common pollen or animal allergies, are the most common health effects for individuals sensitive to molds. Flu-like symptoms and skin rash may occur. Molds may also aggravate asthma. Fungal infections from building-associated molds may occur in people with serious immune disease but this is very rare. Most symptoms are temporary and eliminated by correcting the mold problem in the home.

When your home is inspected by a Professional Home Inspector they are checking for proper ventilation, presence of moisture, proper insulation, mould, proper structural support and signs of rodent or animal entry. Bat feces or vermiculite insulation removal can run into ten thousand dollars or more for removal. Compared to the cost of hiring the Barrie Home Inspector for $200.00 this is a really cost effective way to protect yourself and ensure Peace of Mind on your next Real Estate purchase.

 

Siding and Cladding for Your Home

Siding and Cladding for Your Home.  Nothing will impact the appearance of your home more then the siding that’s on it. When shopping for siding you may want to consider what suits your lifestyle as well as the style of your home. Siding is the outer covering ( A.K.A. Cladding ) of a home meant to shed water and protect the home from the effects of weather but it may also act as a key element in the aesthetic beauty of the structure and directly influence its property value. Here are a few types of siding you may want to consider :

Stucco: Traditional stucco is cement combined with water and inert materials such as sand and lime but many homes built after the 50’s may resemble stucco but they actually use a variety of synthetic materials to achieve the same look. Stucco can be tinted to the colour you want and then the need to paint is gone forever. Synthetic stucco siding is lighter then the traditional and is more likely to suffer damage from a hard blow. It is often compromised of foam insulation board or cement panels screwed to the walls and the stucco is applied around it.

As a building material, stucco is a durable, attractive, and weather-resistant wall covering. It was traditionally used as both an interior and exterior finish applied in one or two thin layers directly over a solid masonry, brick or stone surface. The finish coat usually contained an integral color and was typically textured for appearance.
Stucco or render is a material made of an aggregate, a binder, and water. Stucco is applied wet and hardens to a very dense solid. It is used as a coating for walls and ceilings and for decoration. Stucco may be used to cover less visually appealing construction materials such as concrete, cinder block, or clay brick and adobe.

Stone veneer siding: Stone veneer is used as a decorative and protective covering for both interior and exterior applications. Stones like granite , limestone, slate, etc… are not only beautiful and hardly affected by weather , there also really expensive. That’s why precast stone veneers and facings became popular , the can look genuine ( depending on the product) and are also much more affordable the the real thing. The veneer is typically no thicker then 1″ and must weigh no more then 15 lbs per square foot to be installed without additional structural supports. These veneers can be made from natural stone by cutting the stone into thinner pieces or can be manufactured to look like stone.

Vinyl siding: Vinyl siding is one of if not the most popular type of siding. Unlike wood , this durable plastic will not rot or flake. Vinyl is available in several colour and it is said that it will never have to be painted. Advertisements say that vinyl siding is permanent and although it will last a very long time, it is less durable then wood or masonry. Heavy winds have been known to lift panels from the wall and windblown debris and strong hail can puncture it. New technologies are making this material stronger but the sheets may still crack if struck by a lawnmower or snow blower and unfortunately panels cannot be patched, they can only be replaced.

Engineered wood siding: Engineered wood siding is made from wood products and other materials. The panels can be molded to resemble traditional clapboards although it does not exactly look like real wood due to the fact that it’s textured grain is uniform. It does however look more natural then vinyl or aluminium siding. The benefit of engineered wood siding is that it offers all the advantages of of regular wood siding but in addition, it’s termite resistant and it will not rot,crack or split.

Having a Professional Home Inspector inspect your home prior to purchase will allow your new homes cladding to be inspected by a Professional like the Barrie Home Inspector. He will inspect for cladding of siding failure or poor installation techniques. Having all the information available is paramount prior to purchasing real estate, whether for investment or for your new home.

 

Barrie Home Inspector © 2013 Frontier Theme