Relevant Facts And Items To Know About A Drain Field Septic System

Relevant Facts And Items To Know About A Drain Field Septic System.  Sometimes known as a leach drain or leach field, a drain field septic system can be quite a process. The components of this system are basically three pieces. These pieces are a septic tank, the septic field drain, and the pipes for the flow. The purpose of this system is to filter the liquid that comes from the tank, removing any contamination that might be included.

The most useful reason to have one of these systems is to breakdown and get rid of organic waste in a special microbe environment. The setup of this product uses a series of drains that have pipes placed in them. These pipes have various holes placed in them and they are placed in the trench with gravel or some other type of porous substance.

The top of the trench is covered with some type of soil to keep surface water or animals from interacting with the wastewater for the trenches. Within this type of system there are two major designs that can be used. The hydraulic design is best when used to dispose of a large amount of wastewater and catabolic can be used for long term demand of the water.

The first step before starting on your hydraulic design is to perform a percolation test in the sewage treatment systems. This test gives the designer the ability to see the rate of flow within the soil and determine if the area is proper enough to be used. In many locations it is mandatory to administer the test by the local health department.

The reason that such procedures are in place is to stop disease plagued viruses or bacteria from reaching the surface water. This septic system is best because disinfectants would kill the microbes in the tank and stop the catabolizing of the wastewater. A field drain holds the pathogens long enough to deactivate them.

The type of soil is very important to the effectiveness of the field lines. If you have a sand or gravel mixture the filtration would not take enough time to kill the harmful bacteria before it made it to the surface water. A silt and clay mixture works best holding the bacteria long enough to assure it is dead.

The design is appropriately for the support of microbes that are aerobic in the soil environment. This type of microbe has the chance to decompose the material that is anaerobic in the tank that contains aerobic water.

A biofilter used in conjunction with a septic tank can drastically reduce the area of the drain field. This device allows for many positive things to come out of its function. Residential construction can be increased in an area with a minimal disturbance of the site. There is much more usable land in the area for trees, landscaping, swimming pools, or other types of gardens. Even though it does not reduce the amount of liquid into the soil, it does cut down on oxygen demand.

Even with such an efficient process there are still things that you need to keep out of your tank. Cleaning supplies will start to kill the helpful microbes causing a slow down in your production. Petroleum based products and dissolved metals also put a strain on the environment.

When doing research for the drain field septic system, consider Pinnacle Environmental Technologies INC for the best outcomes. The Canada grease interceptors company offers environmentally friendly septic tank systems for commercial, residential or mobile use.